Table Press for Clamping and Straightening - System 28 Welding Tables (Item No. 2-28004643)
- Product SKU: 2-28004643
- Category: System 28mm Metric Series Welding Tables and Fixturing Accessories
Table Press for Clamping and Straightening - System 28 Welding Tables
(Item No. 2-28004643)
Perfect weldments by pre-stressing before welding. The table press is used for straightening deformed steel products. With a compressive force of 2.5 tons, parts that have unwanted unevenness or tension in the material, can be straightened. With the additionally available pipe bending stamp, pipes with a diameter of up to 1.5" O.D. / 42mm O.D. can be bent flexibly.
The total stroke is 2.3" / 60mm, which can be achieved with 13 pump strokes with an operating force of approx. 330 N (stroke per pump stroke 4.6mm). An overflow valve prevents additional pressure build-up when the piston rod is fully extended. For a secure attachment on the table, the table press can be fixed through the turret head by using Fast Clamping Bolts or by the attached bolt.
The table press must always be fixed in two places.
High Pressing Force:
Pressing force 2.5 tons with an operating force of approx. 330 N.
Working in Vertical Position:
With the help of the integrated bolt, the table press can be attached to the square and additionally fixed with a stop from above.
Bending Round Tube:
With a Round Tube Bending Plug, pipes up to Ø 45 mm can be bent or straightened. Proper handling and several bending processes will lead to a clean result without any marks.
Working in Corners:
Corners can be pressed with an aluminum tip without damaging the inner weldseam.
Table Press Specs and Features:
- Siegmund System: System 28
- Force: 2.5 Tons
- Weight: 12.5 lbs. / 5.7 kg
- Total Stroke: (2-1/4" O.D. / 60mm O.D.)
- Bend up to 1-1/2" O.D. Round Tube (42mm O.D.)
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.