Specs and Features:
- Item No. 2-CS000185.Set
- Stainless Steel
‐ 5 Pieces
‐ As Height Compensation When Using Quick-Change Clamps
‐ For Toggle Clamp (Hole Pattern 40x20 mm / 40x40 mm / 40 mm)
- Length: 59mm (2.32'')
- Width: 59mm (2.32'')
- Material Thickness: 5mm (0.20'')
- Weight: 1.32 Ibs. (0.6kg)
2-CS000185.Set: 5 Pack of 5mm Spacer Plates (Stainless Steel)
Availability:
Pre-Order
$28
$35
Text
Text
Text
1. Define the Height of the Square
- Cut the aluminum profile to the required length.
- Note the minimum height of the cut.
- Ensure cut edges are square.
- Deburr the profile after sawing.
Text
2. Fasten the Base Plate
- Fasten aluminum profile using self tapping screws.
- When the screws are screwed in, a thread is created in the profile.
- Thread cutting is not required with self tapping screws.
- Maximum torque: 20 Nm
Text
3. Insert Square Nuts
- Insert square nuts in the T-Slot of the aluminum profiles.
- For fastening customer-side templates (material thickness 5 – 6 mm) or optionally also lateral fastening of quick-change clamps with M8x12 screws.
Text
4. Fasten the Cover Plate
- Fasten aluminum profile using self tapping screws.
- When the screws are screwed in, a thread is created in the profile.
- Thread cutting is not required with self tapping screws.
- Maximum torque: 20 Nm
Text
5. Mount Accessories
- Mount the quick-change clamp directly on the cover plate.
- The quick-change clamp can also be attached using an adapter.
Text
6. Clamp the Device
- Attachment to perforated plate, welding table or slot table with fast clamping bolts.
- If required, use a M8x12 screw to fasten the customized template to a square nut.
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.